All our wigs will fit the majority of head sizes. They all come with an adjustable head cap.
If you are unsure and would like to double check, get in touch with your head size and wig preference and we’ll measure it up for you.
What kind of fibre is used in our wigs?
All of our wigs (unless stated) use a high temperature fibre that can be heated to 180°C (356°F). This is the lowest setting on most hair tools. Please check your tools specifications before styling your wig.
Wig photo information
All of our modelled wigs are the exact same wigs as pictured on the mannequin. The true colour of the wig will be clearer in the mannequin photo as editing is used in all the professional photos. All our mannequin photos are taken in natural light with no flash. We aim to take two different angles for each mannequin shot.
Where applicable we also use an instagram feed of customers wearing that exact wig. This may help you in deciding whether the colour is what you are looking for.
Please be aware that the colours may look slightly different in person due to your device screen settings.
All photographs are credited and must not be copied or used elsewhere without the express permission of each person involved (Model, Photographer, Lush Wigs).
How to put on your wig
Simply tie your own hair into a low ponytail. Then twist your hair up and pin to your head. You can then optionally put a wig cap on ensuring your own hair is completely tucked underneath. You are then ready to wear the wig.
The majority of our ‘synthetic high temperature fibre’ wigs can be styled (curled, straightened etc.) with most electrical appliances. Please make sure the maximum temperature does not exceed 180°C (356°F). This is the lowest setting on most hair tools. Please check your tools specifications before styling your wig.
There are plenty of resources to be found on YouTube that take you through the process of styling your wig.
Please note that this is always done at the customers own risk. Returns cannot be accepted should any damage occur due to customer styling.
Synthetic hair is not similar to natural hair; in that it does not become dry in the same way due to no sebaceous glands creating grease at the roots. We recommend washing your wig around every 10 – 15 wears just to get it looking healthy again. Keep in mind this is down to the individual user. Some may prefer to wash their wig less or more frequently. Wearing a Wig Cap will reduce the frequency needed for washing your wig.
We recommend using wig shampoo for this.
Before washing you need to remove any tangles or knots.
Gently comb the tangles and any knots from your wig using a wide tooth comb. Never use a regular hairbrush as this will pull to hard on the wig strands and will lead to hair loss. Make sure to work from the ends to the base.
Simply add a small amount of the shampoo to a large bowl or sink of tepid/cool water.
Submerge the wig in the bowl or sink for around five to ten minutes. Never use hot water as this can damage your wig.
Gently swish the wig from side to side. Be careful not to rub the wig. Be gentle.
Drain the bowl or sink water and rinse the wig under clean water to remove any leftover shampoo.
We recommend using wig conditioner for this.
After the shampoo, clean the sink or bowl with fresh water and then fill again with tepid/cool water. Add a small amount of wig conditioner to the water and then swish the wig around in a similar manner to how you first washed it.
Drain the bowl or sink water and rinse the wig under clean water to remove any leftover conditioner.
Wrap a clean towel around the wig and gently press to remove any excess surface water. Allow the wig to air dry naturally by placing the wig onto a wig stand.
We advise to store your wig in the plastic storage bag it was delivered in. We advise against storing your wig on a mannequin head as this can stretch the wig if stored like this for a considerable amount of time. Wig stands are a good alternative.